archlinux 3G(ZTE-MU350) CMWAP 上网笔记

archlinux TD-SCDMA 3G(ZTE-MU350)上网笔记

1 安装 usb_modeswitch ， wvdial

sudo pacman -S  usb_modeswitch  wvdial

2 编辑配制文件：

sudo vim /etc/udev/rules.d/50-zte-mu350.rules

# /etc/udev/rules.d/50-zte-mu350.rules 
# 卸载自动加载成硬盘 
ACTION=="add", SUBSYSTEM=="usb", DRIVERS=="usb", ATTR{idVendor}=="19d2", ATTR{idProduct}=="0003", RUN+="/usr/sbin/usb_modeswitch -v %s{idVendor} -p %s{idProduct} -M 5553424312345678000000000000061b000000020000000000000000000000 -R 1" 


#将MU350转换成串口modem 
SUBSYSTEM=="usb", SYSFS{idProduct}=="0003", SYSFS{idVendor}=="19d2", RUN+="/sbin/modprobe usbserial vendor=0x19d2 product=0x0003"

3 编写拨号脚本, 神州行，cmwap 上网

vim /etc/wvdial.conf 

[Dialer Defaults] 
Modem = /dev/ttyUSB0
Init1 = ATZ 
Init3 = ATE0V1 
Init5 = ATS0=0 
Init6 = AT+CGDCONT=1,"IP","cmwap" 
Init7 = AT+CFUN=1 
Modem Type = USB Modem 
Baud = 460800 
New PPPD = yes 
ISDN = 0 
Phone = *98*1# 
Password = any 
Username = any 
Stupid Mode = 1

4 编写 mu350的 usb_modeswitch切换脚本

sudo vim /etc/usb_modeswitch.d/19d2:0003

#/etc/usb_modeswitch.d/19d2:0003
# ZTE "0003, mu350" devices  


TargetVendor=0x19d2 
TargetProductList="0003,fff1,fffe,ffff" 
MessageContent="5553424312345678c00000008000069f030000000000000000000000000000"

5 编写 mu350的 usb_modeswitch.conf

sudo vim /etc/usb_modeswitch.conf 

# Configuration for the usb_modeswitch package, a mode switching tool for
# USB devices providing multiple states or modes
#
# Evaluated by the wrapper script /usr/sbin/usb_modeswitch_dispatcher
#
# To enable an option, set it to "1", "yes" or "true" (case doesn't matter)
# Everything else counts as "disable"


# Disable automatic mode switching globally (e.g. to access the original
# install storage)

DisableSwitching=0


# Enable logging (results in a extensive report file in /var/log, named
# "usb_modeswitch_<interface-name>" and probably others

EnableLogging=0


# ZTE "0003" devices 1 
DisableSwitching=0 
DefaultVendor= 0x19d2 
DefaultProduct= 0x0003 
TargetVendor= 0x19d2 
TargetProduct= 0x0003
MessageContent="5553424312345678c00000008000069f030000000000000000000000000000" 

CheckSuccess=5 
HuaweiMode=0 

# Enable logging (results in a extensive report file in /var/log, named 
# "usb_modeswitch_<interface-name>" and probably others 

EnableLogging=1 
# ZTE "0003" devices 1 

配制完成。

以后每次上网时，只需在Termial拨号即可。

sudo wvdial

[hpc@ming-archhost sbin]$ sudo wvdial
[sudo] password for hpc: --> WvDial: Internet dialer version 1.61--> Initializing modem.--> Sending: ATZOK--> Sending: ATE0V1OK--> Sending: ATS0=0OK--> Sending: AT+CGDCONT=1,"IP","cmwap"OK--> Sending: AT+CFUN=1OK--> Modem initialized.--> Sending:
 ATDT*98*1#--> Waiting for carrier.CONNECT 2800000--> Carrier detected. Starting PPP immediately.--> Starting pppd at Mon Oct 29 12:02:20 2012--> Pid of pppd: 1456--> Using interface ppp0--> pppd: _[7f]--> pppd: _[7f]--> pppd: _[7f]--> pppd: _[7f]--> pppd:
 _[7f]--> local IP address 10.202.252.143--> pppd: _[7f]--> remote IP address 192.168.0.1--> pppd: _[7f]--> primary DNS address 221.130.33.60--> pppd: