关于 aspsmartupload 注册问题
日期：2011-05-05 浏览次数：20938 次
ASPSMARTUPLOAD : DOCUMENTATION
Setup Instructions
Last modified: August 1st, 1999
© 2000 Advantys. All rights reserved.
Overview
Configuration required
Stage 1 : Extract the downloaded file
Stage 2 : Install aspSmartUpload.dll
Stage 3 : Install aspSmartUploadUtil.dll
Stage 4 : Install samples
--------------------------------------------------------------------------------
Overview
The installation of aspSmartUpload can be broken down into four main stages :
- extract the downloaded file
- saving the aspSmartUpload.dll file on the NT server
- add the aspSmartUploadUtil.dll fils in the NT server Path
- install the samples
These four stages are fully described below.
--------------------------------------------------------------------------------
Configuration required
Server :
- 300Ko of free disk space
- Windows NT 4 Service pack 3+, Microsoft IIS 4
or Windows 95+, Personal Web Server, ASP
or Windows 2000
For Microsoft IIS 3 users :
+ VB5 Runtime
+ asp.dll (version 1.0b+) : http://www.microsoft.com/office/intranet/modules/asp411s3.asp
Browser :
Your browser must be RFC 1867-compliant to be able to upload files.
Netscape 3+ and Microsoft IE 3.02+ accept the RFC 1867.
--------------------------------------------------------------------------------
Stage 1 : Extract the downloaded file
All the aspSmartUpload files are supplied in the zipped file, aspSmartUpload.zip.
Extract aspSmartUpload.zip to a temporary directory, making sure the directory structure remains intact.
If, for example, you extract the file to \temp, you should see the following :
--------------------------------------------------------------------------------
Stage 2 : Install aspSmartUpload.dll
You have to register aspSmartUpload.dll on your server. The dll can be registered by using either
Regsvr32.exe OR Microsoft Transaction Server (MTS).
1st Solution: Using RegSVR32
Copy aspSmartUpload.dll into a directory on the NT server (e.g. c:\mydir).
Save the component using the commands :
REGSVR32.EXE c:\mydir\aspSmartUpload.dll (From DOS or the Start/Run prompt)
2nd Solution: Using Transaction Server
Select the NT server on which you wish to install aspSmartUpload.
Create a new batch.
In the component folder, create a new component called aspSmartUpload.
Paste aspSmartUpload.dll to the Transaction Server to save it.
--------------------------------------------------------------------------------
Stage 3 : Install aspSmartUploadUtil.dll
The objective is to enable the Operating System to access the aspSmartUploadUtil.dll file.
There is two ways to archieve this :
- Copy aspSmartUploadUtil.dll in the c:\winnt\system32 directory. That way you don't have to update the
PATH propertie.
- Copy aspSmartUploadUtil.dll into a directory on the NT server (e.g. c:\mydir).
Add the component directory in the PATH using the commands :
PATH=%PATH%;c:\mydir (From DOS)
--------------------------------------------------------------------------------
Stage 4 : Install samples
Installation
The ASP application must be installed in an ASP-script-enabled web directory.
If your site has the following structure :
\inetpub
\inetpub\scripts
\inetpub\wwwroot
Copy the
\temp\aspSmartUpload\MyInetpub\scripts\aspSmartUpload directory
to the
\inetpub\scripts directory on your server.
Copy the
\temp\aspSmartUpload\MyInetpub\wwwroot\aspSmartUpload directory
to the
\inetpub\wwwroot directory on your server.
Test
Using your browser, enter the following addresses :
http://your_web
Setup Instructions
Last modified: August 1st, 1999
© 2000 Advantys. All rights reserved.
Overview
Configuration required
Stage 1 : Extract the downloaded file
Stage 2 : Install aspSmartUpload.dll
Stage 3 : Install aspSmartUploadUtil.dll
Stage 4 : Install samples
--------------------------------------------------------------------------------
Overview
The installation of aspSmartUpload can be broken down into four main stages :
- extract the downloaded file
- saving the aspSmartUpload.dll file on the NT server
- add the aspSmartUploadUtil.dll fils in the NT server Path
- install the samples
These four stages are fully described below.
--------------------------------------------------------------------------------
Configuration required
Server :
- 300Ko of free disk space
- Windows NT 4 Service pack 3+, Microsoft IIS 4
or Windows 95+, Personal Web Server, ASP
or Windows 2000
For Microsoft IIS 3 users :
+ VB5 Runtime
+ asp.dll (version 1.0b+) : http://www.microsoft.com/office/intranet/modules/asp411s3.asp
Browser :
Your browser must be RFC 1867-compliant to be able to upload files.
Netscape 3+ and Microsoft IE 3.02+ accept the RFC 1867.
--------------------------------------------------------------------------------
Stage 1 : Extract the downloaded file
All the aspSmartUpload files are supplied in the zipped file, aspSmartUpload.zip.
Extract aspSmartUpload.zip to a temporary directory, making sure the directory structure remains intact.
If, for example, you extract the file to \temp, you should see the following :
--------------------------------------------------------------------------------
Stage 2 : Install aspSmartUpload.dll
You have to register aspSmartUpload.dll on your server. The dll can be registered by using either
Regsvr32.exe OR Microsoft Transaction Server (MTS).
1st Solution: Using RegSVR32
Copy aspSmartUpload.dll into a directory on the NT server (e.g. c:\mydir).
Save the component using the commands :
REGSVR32.EXE c:\mydir\aspSmartUpload.dll (From DOS or the Start/Run prompt)
2nd Solution: Using Transaction Server
Select the NT server on which you wish to install aspSmartUpload.
Create a new batch.
In the component folder, create a new component called aspSmartUpload.
Paste aspSmartUpload.dll to the Transaction Server to save it.
--------------------------------------------------------------------------------
Stage 3 : Install aspSmartUploadUtil.dll
The objective is to enable the Operating System to access the aspSmartUploadUtil.dll file.
There is two ways to archieve this :
- Copy aspSmartUploadUtil.dll in the c:\winnt\system32 directory. That way you don't have to update the
PATH propertie.
- Copy aspSmartUploadUtil.dll into a directory on the NT server (e.g. c:\mydir).
Add the component directory in the PATH using the commands :
PATH=%PATH%;c:\mydir (From DOS)
--------------------------------------------------------------------------------
Stage 4 : Install samples
Installation
The ASP application must be installed in an ASP-script-enabled web directory.
If your site has the following structure :
\inetpub
\inetpub\scripts
\inetpub\wwwroot
Copy the
\temp\aspSmartUpload\MyInetpub\scripts\aspSmartUpload directory
to the
\inetpub\scripts directory on your server.
Copy the
\temp\aspSmartUpload\MyInetpub\wwwroot\aspSmartUpload directory
to the
\inetpub\wwwroot directory on your server.
Test
Using your browser, enter the following addresses :
http://your_web
免责声明： 本文仅代表作者个人观点，与爱易网无关。其原创性以及文中陈述文字和内容未经本站证实，对本文以及其中全部或者部分内容、文字的真实性、完整性、及时性本站不作任何保证或承诺，请读者仅作参考，并请自行核实相关内容。
